Directions
How to apply our products
To apply Asphalt in a Bag: clear loose material, pour the mix into the hole (even if it has water in it), over-fill slightly, compact firmly, crown, compact again, and open to traffic immediately. For cracks, clean out the crack and squeeze in ACF-1.
Asphalt in a Bag
- Remove loose material from the hole. For deep holes, lay and compact a base course of sand and stone.
- Pour in Asphalt in a Bag — it can go straight into standing water. Over-fill slightly to allow for compaction.
- Compact firmly with a tamper or roller, crown the patch, then compact again.
- Open to traffic immediately. Aim for 25mm minimum, 50mm ideal.
Crack Filler ACF-1
A latex rubber polymer blend for cracks up to 9mm wide, fortified with latex and asphalt binders and with a low-VOC formula. ACF-1 is pre-mixed.
- Remove all dirt, grass, old crack filler and debris from the crack.
- Shake the bottle well, snip open and squeeze into the crack.
- For larger cracks, fill with sand or backer rod to within 6mm of the surface first — or use DP-1.
- Dry to touch in about 30 minutes; fully dry in 24–48 hours.
Caution: do not allow to freeze. Apply at 12°C and rising, and not if rain is forecast within 24 hours. Clean fresh filler with soap and water; dried filler with turpentine.
Crack Filler DP-1
A ready-to-use, professional-grade butyl rubber and asphalt compound that fills and seals cracks without heating or mixing. It flows into cracks to form a long-lasting water barrier, resists crumbling and drying out from temperature change, UV and severe weather, and won’t run in heat or turn brittle in cold.
Downloads
Directions FAQs
What size cracks can crack filler fix?
How long does crack filler take to dry?
Can I fill a pothole that has water in it?
Fix it once.
Fix it permanently.
Talk to our team about Asphalt in a Bag, Rubberised Crack Filler and bulk supply.